Festool Kapex Mitre Saw
If you require Precision, power and improved cutting capacity the Kapex saw is ideal for you. Featuring double bevel, precise bevel control, adjustable speed and a dual line laser for exact cutting control.
Watch the video to see the benfits the Kapex saw will deliver.
FESTOOL 561285 KAPEX KS120 SLIDING COMPOUND MITRE SAW 240V
With variable speed pre-selection, smooth start-up, safety brake and overload protection the MMC electronics minimise
working stress and adapt machine performance to
the working material.
FastFix saw blade changing system.
Rapid blade changes with a
convenient saw blade changing system that saves you time and money.
The guard release is integrated in the two-stage switch and can be operated by both right and left-handers. The same applies
for the safety switch-on lock.
The KAPEX is fitted with an
extraction connector and an
efficient chip deflector funnel: the chips are extracted directly where they are produced.
Settings accurate to the millimetre.
Fine adjuster operated from the front, for precise cutting angles. Make complex cuts in no time at all.
Cut accurate grooves with the stepless trenching depth adjuster: simply actuate the lever, set the trenching depth with a single turn and start
Secure workpiece support surface.
The large sliding quick-release fences allow the accurate positioning of workpieces in their 'original wall position' and the attachment of self-manufactured positioning supports.
Precision dual-line laser.
Irrespective of whether you
position the workpiece from the left or right, the laser lines will always show the exact width of the cut and make your work easier as a result.
Robust and stable.
The KAPEX was designed for tough industrial applications. The large magnesium diecast base with rubber feet provides
The easy-to-read scales are
pointer can also be adjusted.
The rotary base has a 60°
range and is adjusted via the convenient clamp lever.
Transport safety device, clamp, cable holder, well designed hand grips and 21.5 kg in weight - the KAPEX is ideal for mobile applications.
Transfer interior and exterior angles precisely from the workpiece to your KAPEX using the bevel.
Intelligent base height.
The KAPEX saw base is the
same height as the SYSTAINER SYS 1, which can be used to support long workpieces when working on the floor.
120 mm cutting depth.
The unique special cutting position on the KAPEX allows you to cut strip material with a maximum height of 120 mm quickly, safely and accurately.
Space-saving precision design.
The innovative twin-column guide holds the saw blade in position with even greater accuracy and excludes com-ponents protruding from the rear.
The tilt angle is easy to adjust from the front. Simply detach the quick-release clamp, set the angle and lock - it couldn't
The cable holder keeps your workplace tidy and eliminates dangerous obstacles when you
transport the machine.
BrandsSelect a brand
Express OrderKnow your codes