MAFELL KSP55F PLUNGE SAW 110V INCLUDES 1.6M GUIDE RAIL

MAFELL KSP55F 110VOLT CIRCULAR SAW COMPLETE WITH 1.6M GUIDE TRACK

At MAFELL you can find the plunge cut saw that plunges safely, because the riving knife is where it should be during plunge cutting: at the saw.

A 1100W (1.5 hp) “MAFELL-made” motor is the heart of this portable circular saw. The aim here was to design a robust, easy-to-handle machine for the joiner and carpenter suitable for everyday use. The highlight: novel twin-located height adjustment, with which the machine can also be used as a plunge cut saw – the riving knife disappears into the protective cover when plunge cutting.

Like all Mafell portable circular saws, the KSP55F also fits onto the MAFELL guide rail system. As a package this is so reasonably priced that sawing without a guide rail will become the exception.

• Plunge Cut System with
• Long service life
• Lightweight
• With the MAFELL KSP55 F, it is no longer necessary to unscrew the riving knife – the offers you optimum user-friendliness and safety when plunge cutting.
• Parallel guide fence with dual function – on both machine sides as parallel guide fence and as additional bench support, e.g. for bevel cuts.
• High quality standard means lower machine costs and longer service life.
• Healthy working environment – due to a clean workplace and a clear view of the saw blade thanks to optimal dust extraction when used with a dust extractor.

Standard accessories:

- 1 high-quality carbide-tipped saw blade 160 mm,
(6 5/16 in.), 24 teeth, Ref. No. 092533
- 1 parallel fence
- 1 hose connector for chip extraction,
- 1 hexagon pin spanner SW 5,
- 4 m (13.1 ft) cable with plug

Specification:
Cutting depth 0 - 2 3/16 in.
0 - 55 mm
Tilt 0 - 45 degrees
Revolutions-no load 4400 rpm (1/min.)
Motor universal
single-phase 230 V
Power-input 1.5 hp (1100 W)
Weight 8.8 lbs (4 kg)