MAFELL KSS300 MAXIMAX PLUNGE SAW 110V INCLUDES 1.4M FLEXIBLE TRACK

Cross-cutting system KSS 300

In internal finishing, one thing is important above all else: precision. Designed for supreme handling, the KSS 300 cross-cutting system therefore focuses on all the key functions for this type of work. Fastening the portable circular saw to the KSS rail creates a very practical single-handed cross-cutting system for bevel and miter cuts; once the cut has been executed, the saw automatically returns to the starting position. Offering a maximum cutting depth of 42 mm, the portable circular saw delivers ample power in all situations. Thanks to magnesium die-cast components, this especially neat and lightweight saw weighs only 2.6 kg. The entire, compact sawing system is accommodated in the MAFELL MAX carrying case – it is an ideal tool for shadow gaps, rip, bevel, plunge and angled cuts, as well as free-hand work.

Quick-release catch
Enables you to detach the machine from the rail in a single, quick action. The saw can then be used as a separate portable circular unit with all the functionality of the MAFELL KSP series.

Tilting system
The pivot point of the KSS 300 is on the side, on the bottom edge of the rail. This has the advantage of requiring only a single tracing pointer for all angles – with or without the rail.

Plunge-cut system with FLIPPKEIL
Detachable riving knives are a thing of the past – MAFELL's knife remains exactly where it should be when the blade enters the work: attached to the saw.

Miter cuts
Miters and more: simple execution of cuts for all angle joints from + 45° to – 60°. The most common angle settings engage in the rail to make the work as quick and precise as possible.



Standard accessories
KSS 300 MaxiMAX cross-cutting system in MAFELL-MAX case; Ref. No. 916702
Flexi-Guide, 1.4 m (MaxiMAX only); Ref. No. 202870
TCT sawblade 120 x 1.2/1.8 x 20 mm / 40 flat/trapezoidal teeth; Ref. No. 092559
Parallel fence; Ref. No. 203180
Hose connector; Ref. No. 203782
Allen key; Ref. No. 093074
Cable, 4 m; Ref. No. 087323
Special accessories / tools:
• Screw clamp for fixing rail to work; Ref. No. 093281
• TCT sawblade 120 x 1.2/1.8 x 20 mm / 32 alternating teeth, for universal use; Ref. No. 092558
• TCT sawblade 120 x 1.2/1.8 x 20 mm / 40 flat/trapezoidal teeth, for fine sawing; Ref. No. 092559
• TCT sawblade 120 x 1.2/1.8 x 20 mm / 12 alternating teeth, for ripping; Ref. No. 092560



Technical data
Cutting depth 0 - 40 mm (1 9/16 in)
Tilt 0 - 45 degrees
Revolutions-
no load 8800 rpm
Motor universal
single-phase 230V / 50Hz
Power-input 900 W (1.2 hp)
Weight