MAFELL KSS300 MAXIMAX PLUNGE SAW 240V INCLUDES 1.4M FLEXIBLE TRACK

Cross-cutting system KSS 300In internal finishing, one thing is important above all else: precision. Designed for supreme handling, the KSS 300 cross-cutting system therefore focuses on all the key functions for this type of work. Fastening the portable circular saw to the KSS rail creates a very practical single-handed cross-cutting system for bevel and miter cuts; once the cut has been executed, the saw automatically returns to the starting position. Offering a maximum cutting depth of 42 mm, the portable circular saw delivers ample power in all situations. Thanks to magnesium die-cast components, this especially neat and lightweight saw weighs only 2.6 kg. The entire, compact sawing system is accommodated in the MAFELL MAX carrying case – it is an ideal tool for shadow gaps, rip, bevel, plunge and angled cuts, as well as free-hand work.Quick-release catchEnables you to detach the machine from the rail in a single, quick action. The saw can then be used as a separate portable circular unit with all the functionality of the MAFELL KSP series.Tilting systemThe pivot point of the KSS 300 is on the side, on the bottom edge of the rail. This has the advantage of requiring only a single tracing pointer for all angles – with or without the rail.Plunge-cut system with FLIPPKEILDetachable riving knives are a thing of the past – MAFELL's knife remains exactly where it should be when the blade enters the work: attached to the saw.Miter cutsMiters and more: simple execution of cuts for all angle joints from + 45° to – 60°. The most common angle settings engage in the rail to make the work as quick and precise as possible.Standard accessoriesKSS 300 MaxiMAX cross-cutting system in MAFELL-MAX case; Ref. No. 916702Flexi-Guide, 1.4 m (MaxiMAX only); Ref. No. 202870TCT sawblade 120 x 1.2/1.8 x 20 mm / 40 flat/trapezoidal teeth; Ref. No. 092559Parallel fence; Ref. No. 203180Hose connector; Ref. No. 203782Allen key; Ref. No. 093074Cable, 4 m; Ref. No. 087323Special accessories / tools:• Screw clamp for fixing rail to work; Ref. No. 093281• TCT sawblade 120 x 1.2/1.8 x 20 mm / 32 alternating teeth, for universal use; Ref. No. 092558• TCT sawblade 120 x 1.2/1.8 x 20 mm / 40 flat/trapezoidal teeth, for fine sawing; Ref. No. 092559• TCT sawblade 120 x 1.2/1.8 x 20 mm / 12 alternating teeth, for ripping; Ref. No. 092560Technical data Cutting depth 0 - 40 mm (1 9/16 in) Tilt 0 - 45 degrees Revolutions-no load 8800 rpm Motor universalsingle-phase 230V / 50Hz Power-input 900 W (1.2 hp) Weight