MAKITA DHR242RFE 18V BRUSHLESS 3 MODE SDS+ HAMMER DRILL 2 X 3.0Ah BATTERIES + 5 ASSORTED SDS DRILL BITS

Ref: MAKITA DHR242RFE
New for 2012 the Makita BHR242 SDS+ Brushless ROTARY HAMMER is given huge power by a 18v Li-ion battery. It features strong effective performance combined with ergonomic design.
£379.97 inc VAT
(£316.64 exc. VAT)
QTY

MAKITA DHR242RFE 18V BRUSHLESS 3 MODE SDS+ HAMMER DRILL 2 X 3.0Ah BATTERIES + 5 ASSORTED SDS DRILL BITS

New for 2012 the Makita BHR242 SDS+ Brushless ROTARY HAMMER is given huge power by a 18v Li-ion battery. It features strong effective performance combined with ergonomic design. Built with the operator in mind the BHR242 has a centre of gravity closer to the vibration absorbing handle, this design gives unrivalled tool balance which in turn reduces the operators fatigue and gives a more productive working day.

Makita's Lithium-ion battery is the quickest, lightest and most powerful battery technology to date. At 40% lighter, 2000+ charging cycles, 430% more run time and an incredible charge time of 22 minutes the Makita Lithium-ion system is a formidable force for any job.


Features:

  • Able to drill in concrete as fast or faster than 24V Cordless Combination Hammer model BHR200
  • One touch slide chuck for SDS-plus bit
  • Easy-to-grip handle
  • Ergonomically designed to give maximum power thrust
  • Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
  • 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
  • The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
  • Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30% giving longer run times between battery charges
  • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact

 

Specification:

  • Max in Steel: 13mm
  • Max in Wood: 27mm
  • Max in Concrete: 24mm
  • No Load Speed: 0-950rpm
  • Blows per minute: 0-4,700bpm
  • Single impact energy: 2.4J
  • Vibration: 15/sec2
  • Charging Time: Approx 22 min
  • Net Weight: 3.3kg
  • Total Shipping Weight: 8kg

 
Supplied with: 22 minute Makstar charger with built in fan, 2 x 3.0Ah li-ion battery cartridges with 5x lower self-discharge (for use any time) and 16 firm-holding contact terminals (for constant high power), Carry case, Depth gauge, Side handle

 



 



Specialist Advice

Call or email our team of specialists for advice that you can trust.

01223 498700

Feefo Trusted Merchant
 
Visit the shop
Win Makita 12V Drill Driver

© Ridgeons 2014 | Environmental Policy

Website Design by Affinity | SEO by affinity i-marketing