PANASONIC EY74A1LS2G DUAL VOLTAGE 14.4V OR 18V DRILL DRIVER WITH 2 x 18V 4.2AH LI-ION BATTERIES + FREE 54 Piece Quick Change Accessories Set

PANASONIC EY74A1LS2G DUAL VOLTAGE 14.4V OR 18V DRILL DRIVER WITH 2 x 4.2AH LI-ION BATTERIES, CHARGER AND CARRY CASE

The EY74A1LS2G ½" drill and driver kit is built to take on both jobs with versatility and power that general construction, plumbing, finish carpentry and electrical installation workers need to do the job efficiently and professionally.  Features Panasonic's new Dual Voltage Technology which allows the user to use the cordless drill and driver as an 18V or 14.4V tool.  Its compact size - only 8" long x 9-13/32" tall x 2-5/16" wide - gets it into tight spaces. The tool can produce 372 in.-lbs. of power so it can take on tough tasks such as drilling up to 1-3/8" holes in wood or ½"-diameter holes in metal. In driving mode, the tool can drive M5 machine screws, ¼"-diameter wood and self-tapping screws easily and repetitively.The tool's beefy four-brush motor puts out power and takes on difficult tasks with much less chance of burning the motor out on jobs users sometimes expect the tool to do.

The variable speed, reversible two-speed transmission efficiently converts the motor's power into drilling/driving power. Tthe 80-600 rpm low speed helpful in deep wood-drilling and -driving jobs, while the 220-1,750 rpm high speed works best in most metal drilling jobs. An electric brake stops chuck spin instantly when the trigger is released. A built-in LED light makes work in dark areas easier and a belt hook keeps the tool close at hand when it's not in use.  The 18-stage clutch lets the user adjust driving force to the job. It adjusts from approximately 4.3 to 39.0 in. lbs. in 2 in. lbs. increments, so driving force matches driving needs without overdriving or stripping fasteners.  At just 4.30 lbs. including battery, the tool's light weight and ergonomic design helps keep the user's wrist in the neutral position. The light weight and tool design work together to cause less fatigue and improve tool control.

 Tough tools for tough conditions
Being Tough IP rated. having passed demanding laboratory tests of working in extremely dusty work environments and the effects of water getting sprayed on the tool by powerful jets. The dust protection test subjects the tool to a very dusty environment and then puts it to work to assure the tool was unaffected by dust exposure. Similarly, the water protection test put the tool up against increasing levels of water exposure. It attained a six out of eight levels rating, withstanding the effects of powerful water jets. Whether it's extremely dust work conditions or work in damp or wet locations, users will appreciate a tool that will keep working when others would likely fail. Consult the safety and operating instructions for more information.  Water getting into the battery doesn't have to mean it's a goner. Panasonic engineers have added vents built in the battery case so water can easily drain out of the battery pack

Battery packs that are smart, too
Sometimes professional users are their own tool's worst enemy, attempting to push them past their design limits. This can lead to irreversible battery or tool damage. That's why Panasonic 4.2Ah LS battery pack cells are independently monitored for even discharge while preventing over-charging and over-discharging. An over-discharge sensor prevents the user from running the tool after it reaches the point where too-low voltage output could damage the battery or the tool. Plus, an internal temperature sensor flashes a warning light if internal temperatures rise, and then cuts off tool power if battery temperature reaches critical levels.



Specifications:

• Battery 4.2Ah Li-ion
• IP 56 Approved Yes
• Dual Voltage Technology Yes
• Size 8" x 9-13/32" x 2-5/16"
• Lightweight 4.30 lbs
• High Power 372 in. lbs
• 2 Speeds & Reversible Low: 80 - 600rpm / High: 200 - 1,750rpm
• Clutch Torque 4.3 - 39 in.lbs. (2.0 in.lbs. per stage, total 18 stages)
• Charging Time - Usable 65 minutes
• Charging Time - Full 80 minutes
• Electric Brake Yes
• LED Work Light Yes
• Max Drilling Diameter in Wood: dia.1-7/16"
• Max Drilling Diameter in Metal: dia.1/2"
• Max. Screws. Driving Wood Screws: dia.5/16" Self-Drilling Screws: dia.1/4"

Supplied with:  2 x EY9L51B batteries , 1 x EY0L81B Battery Charger and Carrying Case