TREND LOCK/JIG/A MORTICE LOCK AND DEADLOCK JIG FOR DOORS 34-58MM
Ref: TREND LOCK/JIG/A
new
Next day delivery available on this item
Trend Lock Jig, for routing the face-plate and mortise for larger locks quickly and accurately. Suitable for doors measuring 34-58mm in width.
More
£82.80 inc. VAT
(£69.00 exc. VAT)
-
TREND LOCK/JIG/A MORTICE LOCK AND DEADLOCK JIG FOR DOORS 34-58MM
- Suitable for DDA (Disability Discrimination Act) lock size.
- 20mm x 235mm radius end face plate and 17mm x 170mm mortise.
- Adaptor plate included to allow smaller templates (239mm x 60mm) to be fitted (as supplied with standard LOCK/JIG).
- Suitable for doors 34mm to 58mm thick.
- An auger bit and drill is required to complete deep mortises.
- The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter.
- A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Internal code: TP268150
TREND LOCK/JIG/A MORTICE LOCK AND DEADLOCK JIG FOR DOORS 34-58MM
- 1x Guide bush collar
- 2x Face plate template
- 1x Mortise template
- 1x Template adapter
- 6x Spacer Fingers
