01223 498700 8:00am-5:00pm Mon-Fri
MAKITA

MAKITA DHP481-DTD154-DHR242 18V TRIPLE KIT WITH 2X 5.0AH LI-ION BATTERIES, CHARGER & BAG

Ref: DHP481-DTD154-DHR242
new
Feefo logo
Delivery Next day delivery available on this item
The Makita DHP481-DTD154-DHR242 18V Triple Kit With 2x 5.0Ah Li-ion Batteries, Charger & Bag covers a variety of applications. Fantastic value for money. More
£0.00 VAT exempt
  • Item is no longer available. For more details please call 01223 498700
  • MAKITA DHP481-DTD154-DHR242 18V TRIPLE KIT WITH 2X 5.0AH LI-ION BATTERIES, CHARGER & BAG

    DHP481 Combi Hammer Drill

    • Extreme Protection Technology (XPT) offers maximum protection against dust, debris and liquids for optimal performance in extreme conditions
    • Battery fuel gauge indicates approximate remaining battery power
    • Brushless DC motor with high power to weight and size ratio
    • Brushless DC motor generates less heat buildup and is ideal for prolonged use in manufacturing / production applications
    • Battery protection system provides over-discharge, temperature and circuit protection for enhanced performance, battery cycle life and overall battery life
    • 21 clutch settings deliver up to 1,090 in. lbs. of torque
    • All metal gears for more efficient power transmission
    • Ultra-compact design (only 8-1/8" long)
    • Dual LED job lights with afterglow feature
    • Improved ergonomic soft rubber grip design for vibration absorption and comfortable operation features re-contoured rear grip portion and ribbed grip for improved hold

    DTD154 Impact Driver

    • T-mode: Tightening mode for self-drilling screw
    • Electronic 3-stage impact power selection (Hard/Medium/Soft)
    • Brushless motor
    • One touch sliding chuck for easy bit installation and removal
    • LED job light
    • Ergonomic soft grip
    • Electric brake
    • Variable speed control by trigger
    • Forward/reverse rotation
    • Compact overall length

    DHR242 SDS Hammer Drill

    • Strong effective performance combined with ergonomic design
    • Centre of gravity closer to the vibration absorbing handle gives unrivaled tool balance, which in turn reduces the operators fatigue and gives a more productive working day
    • Able to drill in concrete faster than 24V Cordless Combination Hammer model BHR200
    • One touch slide chuck for SDS-plus bit
    • Easy-to-grip handle
    • Ergonomically designed to give maximum power thrust
    • Provides a sure and comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip
    • 3 mode operation: Rotation + Hammering, Hammering only & Rotation only
    • The tool body is separated into the upper and lower housings at the foot of handle portion where the housings are jointed with vibration absorbing cushion rubbers
    • Brushless DC motor reduces energy loss by 30% giving longer run times between battery charges
    • Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact

    2x 5.0Ah Li-ion batteries and charger included. Supplied in bag.

    Internal code:

  • MAKITA DHP481-DTD154-DHR242 18V TRIPLE KIT WITH 2X 5.0AH LI-ION BATTERIES, CHARGER & BAG

    DHP481 Combi Hammer Drill

    • 115Nm Torque
    • Hammer action
    • 13mm Keyless chuck
    • Max in wood 76mm
    • Max in steel 13mm
    • Max in masonary 16mm
    • 2 Speed/variable speed
    • Brushless Motor

    DTD154 Impact Driver

    • Voltage 18V
    • Impact Selection 3 stage + Tek mode
    • Driving Shank 6.35mm (1/4") Hex
    • Blows per Minute (Hi) - ipm 0 - 3800 ipm
    • Blows per Minute (Med) - ipm 0 - 2600 ipm
    • Blows per Minute (Lo) - ipm 0 - 1100 ipm
    • Machine Screw M4-M8
    • Standard Bolt M5-M16
    • High Tensile Bolt M5-M14
    • Coarse thread (length) 22 - 125 mm
    • Noise sound pressure96 dB(A)
    • Noise sound power107 dB(A)
    • Noise K factor3 dB(A)
    • No Load Speed (hard/med/soft) 0-3600 / 2100 / 1100 rpm
    • Max Fastening Torque 175 Nm
    • Vibration: Fastening Bolt12.5 m/sec²
    • Vibration K factor1.5 m/sec²

    DHR242 SDS Hammer Drill

    • Max in Steel: 13mm
    • Max in Wood: 27mm
    • Max in Concrete: 24mm
    • No Load Speed: 0-950rpm
    • Blows per minute: 0-4,700bpm
    • Single impact energy: 2.4J
    • Vibration: 15/sec2
    • Charging Time: Approx 22 min
    • Net Weight: 3.3kg
    • Total Shipping Weight: 8kg

    2x 5.0Ah Li-ion batteries and charger included. Supplied in bag.

  • MAKITA DHP481-DTD154-DHR242 18V TRIPLE KIT WITH 2X 5.0AH LI-ION BATTERIES, CHARGER & BAG

    • DHP481 Combi Hammer Drill
    • DTD154 Impact Driver
    • DHR242 SDS Hammer Drill
    • 2x 5.0Ah Li-ion Batteries
    • Charger
    • Supplied in bag