MAKITA DHR243RMJ 18V BRUSHLESS 3 MODE SDS+ HAMMER DRILL WITH QUICK CHANGE CHUCK & 2X 4.0AH LI-ION BATTERIES IN CASE
Ref: DHR243RMJ
new
Next day delivery available on this item
The Makita DHR243 SDS+ Drill is an effective and feature packed SDS Hammer Drill, supplied with a quick change chuck, 2x 4.0Ah Li-ion Batteries and Makpac case.
More
£0.00 VAT exempt
-
Item is no longer available. For more details please call 01223 498700
-
-
MAKITA DHR243RMJ 18V BRUSHLESS 3 MODE SDS+ HAMMER DRILL WITH QUICK CHANGE CHUCK & 2X 4.0AH LI-ION BATTERIES IN CASE
The DHR243 SDS+ Drill is capable of drilling in concrete faster than the 24V Cordless Combination Hammer model BHR200.
- One touch slide chuck for SDS-plus bit.
- With Quick Change Chuck
- Easy-to-grip handle ergonomically designed to give maximum power thrust and provide a comfortable grip in any operation; overhead application, drilling with palm-up or palm-down grip.
- 3 mode operation: Rotation + Hammering; Hammering only; Rotation only
- The tool body is seperated into the upper and lower housings at the foot of handle portion where the houses are jointed with vibration absorbing cushion rubbers.
- Higher productivity than model BHR202 achieved by using efficient Brushless DC motor to reduce energy loss by 30%
- Unique rubber joint construction suppresses the transmission of vibration to battery terminals, minimizing battery failures such as terminal breakage or poor electrical contact.
- Compatible with DX01 Dust Extraction System
Internal code: TP020380
MAKITA DHR243RMJ 18V BRUSHLESS 3 MODE SDS+ HAMMER DRILL WITH QUICK CHANGE CHUCK & 2X 4.0AH LI-ION BATTERIES IN CASE
- Battery Type: Lithium-Ion
- Voltage: 18 v
- Capacity in Concrete: 24 mm
- Capacity in Steel: 13 mm
- Capacity in Wood: 27 mm
- Impact energy: 2.0 J
- Blows per minute: 0 - 4700 bpm
- No Load Speed: 0 - 950 rpm
- Vibration: Drilling: 3.5 m/sec²
- Vibration K factor: 1.5 m/sec²
- Vibration: Hammer Drilling: 13.5 m/sec²
- Vibration: Chiselling: 10.5 m/sec²
- Net weight: 3.4 kg
MAKITA DHR243RMJ 18V BRUSHLESS 3 MODE SDS+ HAMMER DRILL WITH QUICK CHANGE CHUCK & 2X 4.0AH LI-ION BATTERIES IN CASE
- Depth gauge
- Side handle
- Quick change 3 jaw chuck for normal drill bits
- Makpac Type 4 Case (821552-6)
- Makpac Inlay (837649-1)
- 2x 4.0Ah Li-ion Batteries (BL1840)
- Battery Charger (DC18RC)
