01223 498700 8:00am-5:00pm Mon-Fri

TREND COMBI1002 WORKTOP JIG 1000MM

Ref: COMBI1002
new
Feefo logo
Delivery Next day delivery available on this item
Trend COMBI1002 Worktop Jig 1000mm. For up to 1000mm wide worktop now with cable tidy insert and circular hinge cut apertures. More
£0.00 VAT exempt
  • Item is no longer available. For more details please call 01223 498700
  • TREND COMBI1002 WORKTOP JIG 1000MM

    • For up to 1000mm wide worktop now with cable tidy insert and circular hinge cut apertures
    • A single male and female template in 16mm solid laminate 
    • Facility to join boards from 450mm to 1000mm wide
    • Facility to cut 22.5 degree mitre corners for hob units 
    • Integral template slots for rounding and mitring of peninsular worktop corners for cable tidy inserts and a circular concealed hinge aperture and 3/4 inch BSP holes for mixer taps 
    • Three alloy location bushes and a width-setting stop
    • Colour coded pin location for quick and easy use
    • Four bolt recess slots for connection bolts, to allow three bolts in 600mm wide worktop
    • Cuts out of square joints (max. 3 degrees)
    • Guide bush and cutter checker
    • 35mm hole for 3/4" BSP mixer tap, and two 25mm holes for bridge (bed) mixer tap at 180mm centres

    Jig requires:

    • A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts
    • A template guide bush with 30mm outside diameter
    • A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length
    • Two 100mm (4 inch) throat clamps

    Internal code: ZZ486225

  • TREND COMBI1002 WORKTOP JIG 1000MM

    • Length= 1200 mm
    • Width= 376 mm
    • Thickness= 16 mm
    • Weight= 9.6kg
    • End cut= 45 degrees
    • Corner Mitre Joint= 22.5 degrees
    • Peninsula radius= approx. 410 mm
    • Corner radius= approx. 75 mm
    • Circular Hinge diameter= 35 mm
    • Female cut material width loss= 23 mm
  • TREND COMBI1002 WORKTOP JIG 1000MM

    • 1 x Length Stop
    • 3 x Location Bushes