MAKITA DK18005 18V BRUSHLESS LXT COMBI DRILL & IMPACT DRIVER 2 x 3AH Li-ion BATTERIES + 8M TAPE MEASURE

MAKITA DK18005 18 VOLT LXT BHP459 COMBI DRILL & BTD129 IMPACT DRIVER WITH 2 X 3AH LITHIUM ION BATTERIES

The NEW Makita DK18005 brushless kit with a BHP459 18V Combi Drill Driver and BTD129 Impact Driver. Not having carbon brushes means higher work per battery charge, no friction is generated with a brushless motor providing higher energy production and work rate. All while using lower amperage causing heat reduction and increased work production on a single battery charge. Both tools feature maintenance free brushless motor for increased life, electronic brake, battery level indicator light, a conveniently located push button for forward and reverse and an LED job light with preglow for use in low visibility applications.

BHP459 Brushless Combi Drill Features:

• Compact design with an overall length of only 192mm
• Single sleeve keyless chuck allows for easy bit installation/removal by one hand
• LED Job light with pre-glow function
• BLDC motor specially designed to provide, above all, more work amount on a single full battery charge

BTD129 Brushless Impact Driver Features:

• LED Job light with pre-glow function
• BLDC motor specially designed to provide, above all, more work amount on a single full battery charge
• Energy production is more efficient than brushed DC motor because of no friction loss caused by brushes, enabling lower amperage for reduced heat production and increased work amount on a single full battery charge

 
Specification:


Combi Drill BHP459

• Barcode: 0088381632744
• Electric Brake: Yes
• No Load Speed: 0-1500/400 rpm
• Max Torque: S/H 25 / 45 Nm
• Torque Settings: 16 + drill
• Variable Speed Control Trigger: Yes
• Max. in masonry: 13 mm
• Max. in steel: 13 mm
• Max. in wood: 38 mm
• Blows per Minute: 0-22500/6000 bpm
• Net weight: 1.7 kg

Impact Driver BTD129

• Barcode: 0088381632744
• Electric Brake: Yes
• Max Fastening Torque: 160 Nm
• Variable Speed Control Trigger: Yes
• No Load Speed: 0 - 2500 rpm
• Maximum Output: 220 w
• Machine Screw: M4-M8
• Impacts per Minute: 0-3200 ipm
• Driving Shank: 6.35mm (1/4") Hex
• Net weight: 1.5 kg

Supplied with: Battery Charger (DC18RC), 2 x 3.0Ah Li-Ion Batteries (BL1830) and Carry Case