METABO KHE96 1700W SDS MAX ELECTRONIC COMBINATION HAMMER 240V

METABO KHE96 1700W SDS MAX ELECTRONIC COMBINATION HAMMER
SDS Max Hammer. With the appropriate accessories, it is also suitable for bits and accessories with spline shank or ratio thread.
Easy to hold in all working situations: three rubber-coated handles always ensure an optimal holding position.
Metabo VibraTech (MVT): reduced vibration levels and therefore less impact on joints due to the integrated damping system on the handles.
Additional handle can be fitted to three places on the housing.
The adjustable front handle can be rotated 360° and the angle adjusted.
Long, slim design for an upright working position when performing tasks at ground level.
Rotation stop for chisel action only.
Vario Tacho Constamatic (VTC) full-wave electronics.
Thumbwheel for preselection of speed.
Electronic soft start for precise spot-drilling. Torque limiting clutch.
Stoppable switch for trouble-free chiselling in continuous operation.
Chisel can be fixed in 16 positions.
Auto-stop carbon brushes. Brush wear indicator.
Drilling capacity in Concrete: with hammer drill bits: 50mm, with router bits: 80mm, with core bits: 150mm.
Torque: 120Nm.
Wattage: 1700w; Joules: 27J; Blows Per Minute: 1,950 /min; No Load Speed: 125 - 250 /min; Net Weight: 11.8Kg; We Supply This Metabo KHE96 With: Metabo VibraTech (MVT) side handle. drilling depth guide, lubricant for tool shank end, duster and carry case.